Silva, M., McHugh, I. & Daly, E. (2024). Digby Plantation Flux Data Release 2024_v1. Version 2024_v1. Terrestrial Ecosystem Research Network. Dataset. https://dx.doi.org/10.25901/knrh-3707
Digby Plantation Flux Data Release 2024_v1
Ver: 2024_v1
Status of Data: completed
Update Frequency: biannually
Security Classification: unclassified
Record Last Modified: 2025-12-02
Viewed 36 times
Accessed 4 times
Dataset Created: 2024-03-21
Dataset Published: 2024-04-18
Data can be accessed from the following links:
How to cite this collection:
This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.17) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).
The Digby Plantation flux station was installed in a recently planted blue gum (Eucalyptus globulus) plantation near the town of Digby in western Victoria, Australia. The plantatiopn was establlished in August 2017 with a tree density of approximately 1000 trees per hectare. The seedlings were about 30 cm tall and the trees were about 11 m tall in July 2021. The equipment was installed on an extendable tower that was moved from 5 m at the beginning of the monitoring period to about 15 m at the end of the experiment, following the growth of the trees.
The Digby Plantation flux station was installed in a recently planted blue gum (Eucalyptus globulus) plantation near the town of Digby in western Victoria, Australia. The plantatiopn was establlished in August 2017 with a tree density of approximately 1000 trees per hectare. The seedlings were about 30 cm tall and the trees were about 11 m tall in July 2021. The equipment was installed on an extendable tower that was moved from 5 m at the beginning of the monitoring period to about 15 m at the end of the experiment, following the growth of the trees.
Credit
We at TERN acknowledge the Traditional Owners and Custodians throughout Australia, New Zealand and all nations. We honour their profound connections to land, water, biodiversity and culture and pay our respects to their Elders past, present and emerging. This research was supported by the Australian Research Council (grant no. DP180101229). PF Olsen Australia is thankfully acknowledged for providing access to the plantation site.
Purpose
The purpose of the Digby Plantation station was to monitor the fluxes in a blue gum (Eucalyptus globulus) plantation during the first few years after its establishment. The aim was to understand how the water efficiency of the plantation changes as trees rapidly grow in the years after being planted.
Lineage
All flux raw data is subject to the quality control process OzFlux QA/QC to generate data from L1 to L6. Levels 3 to 6 are available for re-use. Datasets contain Quality Controls flags which will indicate when data quality is poor and has been filled from alternative sources. For more details, refer to Isaac et al. (2017).
Method DocumentationIsaac P., Cleverly J., McHugh I., van Gorsel E., Ewenz C. and Beringer, J. (2017). OzFlux data: network integration from collection to curation, Biogeosciences, 14: 2903-2928PyFluxPro
Procedure StepsData not provided.
The Digby Plantation flux station is located in blue gum plantation in southwestern Victoria, approximately 300 km west of Melbourne.
Temporal Coverage
From 2018-01-01 to 2021-07-07
Spatial Resolution
Data not provided.
Vertical Extent
Data not provided.
Data Quality Assessment Scope
Isaac P., Cleverly J., McHugh I., van Gorsel E., Ewenz C. and Beringer, J. (2017). OzFlux data: network integration from collection to curation, Biogeosciences, 14: 2903-2928Processing levels
Under each of the data release directories, the netcdf files are organised by processing levels (L3, L4, L5 and L6):
Digby Plantation Flux Tower was established in December 2017 and was decommissioned in February 2022; data after August 2021 might be affected by the height of the trees, which were close to the equipment installed at the top of the tower extended at its maximum height. The processed data release is currently ongoing, biannually.
Under each of the data release directories, the netcdf files are organised by processing levels (L3, L4, L5 and L6):
- L3 (Level 3) processing applies a range of quality assurance/quality control measures (QA/QC) to the L1 data. The variable names are mapped to the standard variable names (CF 1.8) as part of this step. The L3 netCDF file is then the starting point for all further processing stages.
- L4 (Level 4) processing fills gaps in the radiation, meteorological and soil quantities utilising AWS (automated weather station), ACCESS-G (Australian Community Climate and Earth-System Simulator) and ERA5 (the fifth generation ECMWF atmospheric reanalysis of the global climate).
- L5 (Level 5) processing fills gaps in the flux data employing the artificial neural network SOLO (self-organising linear output map).
- L6 (Level 6) processing partitions the gap-filled NEE into GPP and ER.
- default: contains files processed using PyFluxPro
- site_pi: contains files processed by the principal investigators of the site.
- range checks for plausible limits
- spike detection
- dependency on other variables
- manual rejection of date ranges
Digby Plantation Flux Tower was established in December 2017 and was decommissioned in February 2022; data after August 2021 might be affected by the height of the trees, which were close to the equipment installed at the top of the tower extended at its maximum height. The processed data release is currently ongoing, biannually.
Data Quality Assessment Outcome
Data not provided.
ANZSRC - FOR
Australian Plant Name Index
GCMD Sciences
Horizontal Resolution
Instruments
Parameters
Platforms
Temporal Resolution
User Defined
Plantation
Contact Point
Supplemental Information
Data not provided.
Resource Specific Usage
Data not provided.
Environment Description
File naming convention
The NetCDF files follow the naming convention below:
SiteName_ProcessingLevel_FromDate_ToDate_Type.nc
The NetCDF files follow the naming convention below:
SiteName_ProcessingLevel_FromDate_ToDate_Type.nc
- SiteName: short name of the site
- ProcessingLevel: file processing level (L3, L4, L5, L6)
- FromDate: temporal interval (start), YYYYMMDD
- ToDate: temporal interval (end), YYYYMMDD
- Type (Level 6 only): Summary, Monthly, Daily, Cumulative, Annual
- Summary: This file is a summary of the L6 data for daily, monthly, annual and cumulative data. The files Monthly to Annual below are combined together in one file.
- Monthly: This file shows L6 monthly averages of the respective variables, e.g. AH, Fc, NEE, etc.
- Daily: same as Monthly but with daily averages.
- Cumulative: File showing cumulative values for ecosystem respiration, evapo-transpiration, gross primary product, net ecosystem exchange and production as well as precipitation.
- Annual: same as Monthly but with annual averages.
By Parent record
Terrestrial Ecosystem Research Network
80 Meiers Road, Indooroopilly, Queensland, 4068, Australia.
Contact Us
TERN services are provided on an “as-is” and “as available” basis. Users use any TERN services at their discretion and risk. They will be solely responsible for any damage or loss whatsoever that results from such use including use of any data obtained through TERN and any analysis performed using the TERN infrastructure.
Web links to and from external, third party websites should not be construed as implying any relationships with and/or endorsement of the external site or its content by TERN.
Please advise any work or publications that use this data via the online form at https://www.tern.org.au/research-publications/#reporting
Web links to and from external, third party websites should not be construed as implying any relationships with and/or endorsement of the external site or its content by TERN.
Please advise any work or publications that use this data via the online form at https://www.tern.org.au/research-publications/#reporting
Please cite this dataset as {Author} ({PublicationYear}). {Title}. {Version, as appropriate}. Terrestrial Ecosystem Research Network. Dataset. {Identifier}.