This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro as described by Isaac et al. (2017) for the quality control and post-processing steps. The final, gap-filled product containing Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER) has been produced using the ONEFlux software as described in Pastorello et al (2020). This data set has been produced as part of the FLUXNET Shuttle project.
The Whroo flux station was located approximately 45km south west of Shepparton, Victoria (GPS coordinates: -36.6732, 145.0294). The flux tower site was classified as box woodland. The vegetation is dominated by two main Eucalypt species: Eucalyptus microcarpa (Grey Box) and Eucalyptus leucoxylon (Yellow Gum). Smaller numbers of Eucalyptus sideroxylon (Ironbark) and Acacia pycnantha (Golden Wattle) are also found on site. Elevation of the site is close to 165 m and mean annual precipitation from a nearby Bureau of Meteorology site measured 558 mm. Maximum temperatures ranged from 29.8°C (in January) to 12.6°C (in July), while minimum temperatures ranged from 14.2°C (in February) to 3.2°C (in July). Maximum temperatures varied on a seasonal basis by approximately 17.2°C and minimum temperatures by 11.0°C. The instrument mast is 36m tall. Heat, water vapour and carbon dioxide measurements are taken using the open-path eddy flux technique. Temperature, humidity, wind speed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation were measured above the canopy. Soil heat fluxes are measured and soil moisture content is gathered using time domain reflectometry.
Credit
We at TERN acknowledge the Traditional Owners and Custodians throughout Australia, New Zealand and all nations. We honour their profound connections to land, water, biodiversity and culture and pay our respects to their Elders past, present and emerging.
Purpose
The purpose of the Whroo site is:
- to assess how revegetation affects the interaction among carbon dynamics, water regimes (quality, quantity and frequency) and biodiversity across the landscape (above- and below-ground terrestrial, and aquatic ecosystems).
- to develop a robust observational and modelling platform for soil-plant-atmosphere carbon and water fluxes for a range of land-use practices, including carbon farming, in these landscapes.
- to assess how carbon farming can be modified to increase biodiversity conservation.
Lineage
Data collected using standard eddy covariance and meteorological instrumentation on a 36m tower at the Whroo site. The data were quality controlled using the PyFluxPro software package, see Isaac et al (2017), which is available at
https://github.com/OzFlux/PyFluxPro. Gap filling and partitioning has been done using the ONEFlux software package, see Pastorello et al 2020, which is available at
https://github.com/fluxnet/ONEFlux.
Procedure Steps1.
Data is measured using standard micro-meteorological instrumentation on a flux tower.
2.
Data is recorded on a data logger and is collected by the site PI.
3.
Data quality control including removal of data outside plausible ranges, removal of spikes, exclusion of particular date ranges and removal of data based on the dependence of one variable on another is done using PyFluxPro.
4.
Filtering for low-ustar conditions, gap filling and partitioning of NEE into GPP and ER are done using ONEFlux.